Aqua Bond Inc. - A Chemical Supply House   HOME ABOUT CONTACT
Spray and Immersion PreTreatment

GREENBOND

Green-Bond Trust is designed to replace iron and zinc phosphate on steel and galvanized substrates. Green-Bond Trust will produce a conversion coating on aluminum meeting AAMA 2604 and 2605 guidelines with the proper paint or powder coating. Green-Bond Trust is a uniquely formulated conversion coating resulting in a microcrystalline lattice structure that consists of thin tightly interlocked layers on the substrate surface. Green-Bond Trust differentiates itself as "SAM", rapidly self assembling molecule. Whereas iron phosphate initiates at specific sites on the substrate accounting for the "window" effect and zinc phosphates precipitate as crystals.

Green-Bond Fe is a phosphate-free, liquid concentrate designed to clean and pre-treat ferrous metals in a single step. Formulated to prevent flash rusting with its exceptional corrosion inhibiting properties. Improves impact resistance of applied paint films, and prevents under rusting from scores or chips. Green-Bond Fe can also be used as a cleaner and etchant for high pressure/hot water or steam generators systems.

IRON PHOSPHATE

Weldphos Fe is a uniquely balanced liquid iron phosphate, which produces an iridescent blue phosphate finish on steel. Weldphos Fe is formulated as an active corrosion inhibiting paint-bonding phosphate coating on ferrous metals. Comprised of accelerators, detergents, and phos acids, it cleans and produces corrosion resistant coatings on steel substrates. Weldphos Fe can also be used on zinc surfaces to achieve excellent adhesion.

Weldphos MM produces the same iridescent blue phosphate finish on multi-metals. Formulated to clean and form an active corrosion inhibiting paint-bonding phosphate coating, effective on steel, galvanized and aluminum substrates. Weldphos MM is applied through spray and immersion; substitutes are available for brush, roll, and other hand application. 

CHROME PHOSPHATE

Weldcoat is a chrome phosphate pre-paint treatment designed to process aluminum and its alloys. This conversion coating provides excellent paint adhesion and corrosion protection. Weldcoat can be applied by spray or immersion. Chrome phosphate coatings vary from an iridescent green to a dark green.

ZINC PHOSPHATE

H30Phos NF is a uniquely balanced heavy immersion zinc phosphate formulated to exceed the requirements of most auto specifications, as well as providing an excellent pre-paint coating. H30Phos NF provides very good corrosion protection on ferrous metal parts by depositing in excess of 1,800 milligrams per square foot of crystalline zinc phosphate, which serves as an excellent base for supplementary coatings and processes. When used with a water emulsion oil product, such as H30Phos Oil, it achieves over 120 hours salt spray and with oil wax it can surpass 168 hours. H30Phos NF contains no nickel as is common in most zinc phosphates. H30Phos NF can be applied in drawing, cold forming or extruding operations.

SURFACE FINISHING WATER TREATMENT DISTRIBUTORS
Commodities Metal Precipitation Chemical Distribution
Solutions for the Automotive, Building Hardware, Electronics, Heavy Equipment, Energy & Chemicals, Aerospace & Defense, and Industrial Finishes. Aqua Bond develops treatment plans that involve chemical separation of contaminants found in process effluent, as well as support for physical removal methods. Aqua Bond has a full product line available for distributors, backed by an innovative research and development laboratory.
Paint, Powder and E-Coat
A Canadian Company - Located in Toronto, Ontario, Canada © Aqua Bond Inc. 440 Passmore Avenue, Toronto, Ontario M1V5J8 Tel. 416.754.7211 Fax. 416.754.7143 info@aquabond.ca