Wood's Ni Strike Soln

Aqua Bond Inc. manufactures and sells Wood's Ni Strike Soln for Aerospace Landing-Gear plating line applications for high-strength steels (300M, 4340, 17-4H, etc.).  It is used for landing gear cylinders and pistons, actuator rods, high-strength steel pins and trunnions, components receiving cadmium plating, and components receiving hard chrome or sulfamate nickel. It follows the electrodeposited specs AMS/QQ-N-290 documents for nickel plating.  It is packaged in HDPE 205 L drums and 1040 L totes.  See attached TDS, SDS, and C of A in the document section below. Made locally in Ontario serving Canadians.

Unit Size/Capacity Availability Price Quantity
Drum 205 L Only 1 Items in stock.
$2,195.37
Tote 1040 L Only 1 Items in stock.
$9,620.00
Wood's Ni Strike solution addresses high-strength steel, brass, bronze, copper, and copper alloys, and Kovar (Fe-Ni-Co) with tenacious passive oxide films after machining, heat treatment or brief exposure to air.  The oxide layer prevents good adhesion of subsequent elctroplated coatings. Wood's Ni Strike solution uses high chloride to aggressively activate high-strength metallurgical steels (300M/S155; 4340, 17-4PH, Alloy 13-18, Alloy 17-4, Alloy 52 (Fe-Ni), HSLA steels, Maraging steels, and Stainless steel with high temperature containing a minimum of 10.5 chromium). It deposits a very thin, high-adhesion nickel layer, which provides a "keyed" surface for the next plating step.  This works extremely well under subsequent plating of cadmium, chromium, gold, and nickel systems. It is widely used in aerospace, microelectronics, hermetic sealing, RF components, and high-reliability plating applications.
The major aerospace companies such as;  Airbus, Boeing, Bombardier, Collins, Heroux-Devtek, Honeywell, Liebherr, Lockheed, Pratt and Whitney, and Safrun all have specifications for nickel strike on high-strength steel before the main deposit for their plating process. Our Wood's Ni Strike solution meets each of their specs, which we tailor to specifically.  These specifications are usually embedded in the OEM and shop specs but not embedded as public AMS documents. The Wood's strike is the "universal" adhesion promoter between the steel substrate and whatever functional coating comes next. Prior to the Wood's Ni Strike in the plating line is the mild mineral acid step, Hydrochloric Acid A Sol 5% known as the acid activation step and rinse. This mild acid activation step is strong enough to remove oxides and passivation films but gentle enough to avoid excessive attack. Why this process is used in Aerospace shops on high-strength steel is to prevent over-etching, which can damage surface integrity, excessive hydrogen absorption increases embrittlement risk, and dimensional tolerances on landing-gear steels are extremely tight.  Press on "boldface Hydrochloric Acid A Sol 5%" above to learn more about Hydrochloric Acid 5%  product we manufacture to spec. 
Last but not least Aqua Bond Inc., now a part of  Dimachem Inc. differentiates itself by offering a tunable activation tool: customization within the allowable Wood's Nickel Strike operating window to the Aerospace plating shops because every line is unique.  Each shop has different agitation systems, different anode configurations, varying drag-in from upstream cleaning, different base-metal mixes (300 M vs 17-4PH vs Inconel vs copper alloys), different current densities and strike times, and OEM-specific audit expectations.