Weldphos Fe is a single stage, dual purpose liquid concentrate that cleans and deposits as a cleaner and phosphate coating on ferrous metals prior to painting. The cleaning and deposit provide corrosion protection and excellent bonding surface for paint application. Weldphos Fe can also be used on zinc surfaces to achieve excellent adhesion before coating.
Weldphos Fe is liquid steam iron phosphate comprising a mixture of acid, accelerators, and detergents that effectively clean and produce excellent bonding and corrosion coating on steel substrates prior to painting. Weldphos Fe improves the impact resistance and flexibility of applied paint films and prevents the under-rusting of paints if the paint film is scored or chipped. Weldphos Fe is best suited for high pressure hot water or steam generator iron phosphatizing applications. Typically the applied coating weights are 5 to 25 mg/ft2. See TDS for concentration, temperature, and time in our document section. Cleaning application is from bottom to top and then side to side on the work piece, which prevents streaking. No rinse is require upon completion, just dry and apply coating. Weldphos Fe is a uniquely balanced liquid iron phosphate, which produces an iridescent blue phosphate finish on steel.
Weldphos Fe is formulated as an active corrosion inhibiting paint-bonding phosphate coating on ferrous metals. Weldphos Fe comprises of accelerators, detergents, and phos acids that clean and produce corrosion resistant
coatings on steel substrates. Weldphos Fe can also be used on zinc surfaces to achieve excellent adhesion.
Features/Benefits
· Improves impact resistance and flexibility of applied paint films.
· Prevents the under-rusting of paints if the paint film is chipped or scored.
· Best suited for high pressure-hot water or steam generator iron phosphorizing applications.
· Wide operating pH range (3.5 – 5.5), which reduces pH control requirements.
· Cleans and phosphates in one step.
· Superior surfactant system, which cleans faster, resulting in faster coating deposition.
· Operates as low as 48 ºC (120 ºF); but can be operated as high as 100 ºC (212 ºF), if the higher temperature is required to aid cleaning.
· Can be controlled by pH or by acid analysis.
· Economical single step system.
· Liquid material for ease of use.